How can you make your high temperature touch switch lifespan?
Release time：2018-07-11 Clicks： Click
We want to teach you how to let your high temperature light touch switch lifespan, the time used more long, how to do it, the following detailed introduction to you.
How to keep the high temperature touch switch in order to last longer?
High temperature light touch switch is more precise, small electronic components, in the preservation of high temperature light touch switch products, in order to prevent contact end foot from discoloration, affect the use of function below the following conditions are not suitable for preservation:
1. under high temperature and high humidity environment;
2. in the environment of corrosive gas;
3. direct sunlight.
These environments are prone to corrosion and discoloration of contacts of heat-resistant touch switches, which affect the normal use of high temperature touch switches.
High temperature light touch switch use attention:
1. Operation method
1) do not exert strong repeated operation. If the piston is pressed further, the excessive load may result in the deformation of the circular panel spring and become the cause of poor movement.
2) especially if the load is applied to the cross pressure type, the riveting part will be damaged and become the cause of the breakage of the switch. Therefore, when installing and operating, please be careful not to attach additional weight above 29.4N (1 minutes, 1 times).
3) please set the switch according to the direction that the plunger can move in the vertical direction. Only one side of the plunger or the oblique operating port may cause durability reduction.
2. Dust Countermeasures
Because there is no switch with sealed structure, so do not use it in places with dust. If we have to use it, we should consider adopting protective measures such as covering.