Installation Method of Switch Socket in Decoration Room
Release time：2018-12-15 Clicks： Click
How to install the switch socket in the decoration room? Specific installation methods we will give you a detailed introduction today, the following is the details.
In the decoration, we should pay special attention to all kinds of switch sockets. There are also many points needing attention in its installation. Today, we will follow the socket switch manufacturer's knitting to know the matters needing attention in the installation of indoor switch sockets.
1. Before installation, the dirt in the junction box should be cleaned up. The box body is free of the remnants of deformation, rupture, water and other accidents which easily lead to installation difficulties.
2. Switch height is 1.3-1.5 meters from the ground. If there is a wall board in the room, it should be at least 500 PX away from the top of the board.
3. Switch socket panel should be installed correctly, tightly and even with the wall.
4. Switches and sockets on open-laid lines should be installed on open-laid junction boxes. Switches and sockets in cabinets and toilets should be equipped with necessary waterproof cover.
5. When the socket is installed, it should not be installed on the head of the bed or the desktop to avoid contacting the charged body in the socket.
6. The height of the open socket is not less than 1.3 meters and that of the concealed socket is not less than 0.3 meters.
7. In places where children are easy to touch, such as nurseries and kindergartens, the height of sockets should not be less than 1.8 meters.
8. Where grounding is required, protective sockets shall be used, that is, three-hole sockets for single-phase equipment and four-hole sockets for three-phase equipment.
9. All conductors should be fully in contact with the terminal post during installation, and should not be corroded or oxidized. If these defects exist, accidents will occur.
10. Avoid loading multiple strands into the same terminal at the same time, and avoid overload caused by overload when the load exceeds the line power.
11. When installing button switches and sockets, the decorative board can be removed, and then installed when the decoration is completed, or the decorative board can be assembled with plastic bags to avoid the stain caused by environmental decoration.
12. Attention must be paid to wiring, which should be carried out without electricity. For your safety, we recommend that you find a professional to install the switch. Do not install by yourself.
Through the above socket switch manufacturer Xiaobian understanding, I hope to help you.