Why choose waterproof light touch switch
Release time：2019-04-27 Clicks： Click
Why do we like to choose waterproof when we choose to touch the switch lightly? What should we pay attention to when testing waterproofing? Let's give you a detailed introduction.
Many people know that the most important thing for electrical appliances is not to be stained with water. If it is stained with water, there will be many problems. For example, if it is iron products, it will be easy to rust and break down after stained with water. And if the product needs electricity, it must not be stained with water, because if it is stained with water, there will be a short-circuit problem, and if it is serious, it may also be possible. It will cause life danger, so this requires that the products we use have a certain degree of waterproof.
Take our installation of switches as an example. For most people, it's OK to install a switch that can be used at will. There's no need to care about that much. In fact, it's not the switch that we usually use, but the switch that we install in many electrical appliances. Although we may feel that the switch installed in the electrical appliances is not eye-cating, we may not. I don't know that the switch installed in the electrical appliances plays a very important role. If there is a problem with the switch, then his whole electrical appliances may be scrapped. So when we install the switch, we should choose to install the waterproof light touch switch, because if the switch we choose is waterproof, then we don't have to worry about the short circuit of the switch because of water. The problem is, at the same time, the electrical appliances we use will not break down because of the switch.
In addition to this, waterproof touch switch has many advantages. For our waterproof touch switch, he will produce waterproof switch according to waterproof standard. We should know that the waterproof standard at the beginning was ip65, and the waterproof standard required by the development of science and technology has reached ip68, so there are many waterproof touch switches on the market now. Maybe its waterproofing standard is not up to standard, and the products produced by Xinda Technologies Co., Ltd. are different, because its products are subject to an air tightness test, which is the best test in the world to test the waterproofing of products.