Introduction to the Detailed Disassembly Method of Metal Key Switch
Release time：2019-06-15 Clicks： Click
How does our metal key switch disassemble? The specific methods and steps to disassemble are described in detail below.
How should the metal key switch be disassembled? Must follow the correct order to proceed, the following edition will tell you about the metal key switch disassembly work.
First remove the screw or snap that fixes the front panel: Remove the two side panels of the chassis and look in the direction of the front panel, we will see the snap or screw that fixes the front panel. If the screw is fixed, you can use a cross screwdriver with a long handle to unscrew it. If it is a clip, please use a screwdriver and other tools to open it. Remove the front panel: After the above dismantling, if the screw is fixed, the front panel can be removed directly after the general dismantling of the screw. Place the cabinet flat and upside down. If the clasp is fixed, after the clasp is pried, the cabinet body should be pressed by hand, and the hole under the front panel should be extended to open it forcefully. Look at the front panel: There are also screw or snap buttons for the front panel to fix the switch keys. Open it with a screwdriver according to the situation.
Looking at the above, I believe that everyone already knows how to disassemble the metal key switch.