网赌最好最大平台-十大网赌信誉平台-登录

Industry information
Do you need a bracket or a positioning hole when you press the light touch switch on the side?
Release time:2018-08-10
Clicks: Click
  
 
Do you need a bracket or a positioning hole to push the switch? Today, let's give you a brief introduction.
网赌最好最大平台
In the light of the light touch switch, we will inadvertently recall that the flank and flat switch buttons look the same. The difference is that there is a bracket with a positioning column, and the side of the position column is well recognized by a light touch switch, but the support will mislead many people. It is difficult to assemble and design with support, and it is more difficult to assemble and design. It is more common for the side button to touch the switch, which is two kinds of stents and brackets, with the support and the position of the positioning column.
The two forms of the side button touch switch can be the same. The parameters include the service life, the strength, the temperature resistance, the humidity, and even the use of the shrapnel. They are not the same in the appearance, but are the same in the use. If the two kinds of switches are installed on the product, they can not be divided. Which section is with the support, which is with the positioning column. Whether with a bracket or a position column, they are to be better fixed on the product. The touch switch of the side button is different from the other light touch switches. It has only two feet conducting no more feet to fix, and the other light touch switches will have four feet or even more, so there are only two conductive in the multiple feet, and the others are all starting. To the fixed effect.
The light touch switch of the side button is difficult to assemble in the assembly. Like the light touch switch of the patch, it needs to be assembled by the machine, so it is fast and accurate, and the artificial assembly can be damaged when welding. Because the side of the side by the light touch switch is shorter, the bracket or the position column is aligned with the product, and the temperature of the switch welding is so high that it will be damaged for a long time, and the temperature will be damaged. So in the assembly, the machine is usually used, and it is rarely assembled manually, but many of the plug - in touch switches are assembled manually.
With a bracket and a belt positioning column, it can be used together on a side button touch switch. In general, no product will not be designed. This setting is designed to meet the fixed extremely poor products. It is rarely set to use a positioning column and a bracket for the inconvenience of assembly, or even more difficult.
Previous:Treatment of leakage in DC power outlet
Next:How to handle the surface of micro touch switch

Products

More >>
  
Dongkun Electronic Technology Co., Ltd.
Address:No.10, Chenfeng Road, North Gate, Humen Town, Dongguan, China

网赌最好最大平台|十大网赌信誉平台

XML 地图 | Sitemap 地图