网赌最好最大平台-十大网赌信誉平台-登录

Industry information
Treatment of shedding of switch cover
Release time:2018-10-25
Clicks: Click
  
 
If touch the switch cover off the problem should be how to deal with, the specific solution is what, the following to give you a detailed description.
网赌最好最大平台
In the production process, will encounter a customer reaction switch cover will leak phenomenon, a good switch cover how to fall off? First of all, we need to understand the switch structure, the switch cover is on the back cover, this is the same production process for thousands of years, familiar with people will find that the lid is on the base above If the four riveting points are fixed, then the four riveting points can cause the lid to fall off as long as they are loose or the riveting points shrink or deform after high temperature.
Preventive cover only pay attention to the following two problems just for the sake of, one base to use heat-resistant materials, two riveting points to rivet well fixed, do the above two problems, this problem was perfectly solved.
Previous:How to choose the micro switch?
Next:Introduction to adhesion of ultra thin touch switch

Products

More >>
  
Dongkun Electronic Technology Co., Ltd.
Address:No.10, Chenfeng Road, North Gate, Humen Town, Dongguan, China

网赌最好最大平台|十大网赌信誉平台

XML 地图 | Sitemap 地图