网赌最好最大平台-十大网赌信誉平台-登录

Industry information
What should we pay attention to when using micro switch
Release time:2019-05-25
Clicks: Click
  
 
There are some problems that need to be paid attention to when the micro switch is in use. What are the specific ones? Let's give you a detailed introduction.
网赌最好最大平台
Many friends are using the micro switch, but some specific points of attention are not understood, resulting in a lot of unnecessary troubles later, the following small edition to give you a trusted introduction.
Notes for the use of micro-switch:
1. When fixing the main body of the switch, use the small screw of M2 to fix it on the smooth surface with the torque below 0.098N.m. In addition, in order to prevent screw loosening, it is recommended to use gaskets at the same time.
2. Please note that the action body should not exert force directly on the button or the actuator in the free state, but should exert force in the vertical direction when using the button.
3. The action setting after the action is based on the standard of more than 70 [%] of O.T. value. In the case of switch, do not set the action body at the action limit position, so as to avoid the impact of the accompanying opening and closing, and shorten the life of the trip.
Previous:How to test the touch button switch
Next:no

Products

More >>
  
Dongkun Electronic Technology Co., Ltd.
Address:No.10, Chenfeng Road, North Gate, Humen Town, Dongguan, China

网赌最好最大平台|十大网赌信誉平台

XML 地图 | Sitemap 地图