网赌最好最大平台-十大网赌信誉平台-登录

Industry information
How to avoid interference when installing headphone socket
Release time:2019-07-06
Clicks: Click
  
 
When installing headphone socket, we should pay attention to avoiding interference. What should we do? Let's give you a detailed introduction.
网赌最好最大平台
When installing headphone sockets, it is necessary to prevent interference between adjacent groups and each other. The most effective way to prevent interference is to cross-set the projector and the receiver, and to open the group spacing when exceeding the group. Of course, the use is different.
Frequency machine is also a good way. The best way to prevent mutual interference of reflective photoelectric switch is to open the interval.
The farther the headphone socket detection distance is, the greater the interval should be. The specific interval should be determined according to the actual debugging situation.
Of course, different types of machines with different working frequencies can also be used. Mirror angle effect: When the measured object appears glossy or encounters smooth metal surface, the general reflectivity is very high, there is a mirror-like effect.
At this time, the angle between the projector and the detected object should be installed so that the optical axis of the projector is not perpendicular to the detected object, so as to prevent misoperation.
Previous:Introduction of Attention Details for Installation of Dial Switch
Next:Will the light touch switch turn yellow after long use?

Products

More >>
  
Dongkun Electronic Technology Co., Ltd.
Address:No.10, Chenfeng Road, North Gate, Humen Town, Dongguan, China

网赌最好最大平台|十大网赌信誉平台

XML 地图 | Sitemap 地图